Description
The Lumenier tinyFISH Power Stack combines both a F3 Flight Controller and 4A 4-in-1 ESC into a compact stack. It uses a powerful F3 processor along with top of the line hardware. Now you can get all the performance from an F3 based flight controller in a truly micro size! This flight controller uses 16x16mm mounting holes and a low profile design allowing for smaller airframe designs than ever before. The tinyFISH comes with BetaFlight pre-installed.
The tinyFISH F3 Flight Controller has a built 8CH SBUS FrSky compatible receiver, making setup a breeze. This Power Stack has been designed by and named after our friends at fishpepper.de under an open source license.




4-in-1 ESC Features
4-in-1 ESC Specifications
FC Features
FC Specifications
In the box




4-in-1 ESC Features
- 16x16mm M2 hole-to-hole spacing (20x20mm outer dimension)
- a total weight of 1.2g (!)
- BLHeli_S
- DSHOT600 (rev 0.5 and higher)
- regenerative breaking
- 4.3A continuous current
- openhardware + opensource software
4-in-1 ESC Specifications
- Input: 1s Lipo *Please note that this board is for 1S operation only. Do not even try 2S, the board will be immediately releasing all it’s magic smoke and stop working”¦
- Constant: 4.3 Amps
- Burst: 5 Amps
- Weight: 1.3g
- Dimensions: 21x21x2mm
- Mounting Dimensions: 16x16mm
- Motor wire: 70mm
- Signal wire: 140mm
- MCU: BusyBee2 MCU at 48MHz
- PCB - 4 Layer Blind Pole PCB - 3oz Pour
- Mosfet: N-Channel
- BEC: OPTO (none)
- Supports Damped mode, Oneshot125 and Multishot. DSHOT
FC Features
- 1-3S Direct Lipo input support (3-12v)
- 16x16mm hole to hole spacing (20x20mm outer dimension)
- Integrated FrSky compatible SBUS receiver (basically an integrated uSKY rx)
- STM32F3 CPU
- MPU-6000 SPI gyro
- Supports DSHOT
- Integrated Blackbox dataflash
- Integrated voltage- and current-sensor
- Buzzer output
- RGB led output
- Open hardware
FC Specifications
- Target : TinyFish
- CPU: STM32F3
- SPI: ICM-20608-G Accelerometers and Gyroscope
- Mounting Hole: 16x16mm, M2
- Can support current, voltage monitoring
- 2.4G Receiver
- Channel: 8CH
- SUBS Output
- Control Range: 200m
- Compatible with Frsky X9D Plus Transmitter
In the box
- 1x Lumenier tinyFISH F3 Flight Controller
- 1x Lumenier tinyPEPPER AA 4-in-1 ESC
- 1x Set of nylon spacers, screws, nuts
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.