Lumenier Micro LUX F4 Flight Controller + FrSky SBUS Receiver

Save USD $25
LuminierSKU: Lumenier-Acc-MicroLUX-FC-FrSky

Sale priceUSD $24.99 Regular priceUSD $49.99


The Lumenier MICRO LUX F4 Flight Controller brings incredible power and performance to the micro brushless world. It uses a powerful F4 processor along with top of the line hardware. Now you can get all the performance from an F4 based flight controller in a micro size! This flight controller uses 20x20mm mounting holes and a low profile design allowing for smaller airframe designs than ever before. The MICRO LUX comes with BetaFlight pre-installed.

This combo version includes an 8CH SBUS FrSky compatible onboard receiver (D8 Mode). The receiver is pre-soldered to the FC using low profile pin headers combing for only 8mm of total height with both FC and RX.

The MICRO LUX is available as a stand-alone MICRO F4 Flight Controller or with an included 8CH SBUS FrSky compatible receiver. The MICRO LUX supports both SBUS and PPM inputs as well as DSM/DSMX receivers with both 5v and 3.3v support.

The MICRO LUX features a direct plug and play capability with the Lumenier Mini BLHeli_S 10A 4-in-1 OPTO ESC with a simple ESC signal wire jumper. If you need more power, pair this flight controller with 2x of the Lumenier BLHeli_S 20A 2-in-1 OPTO ESCs (20x20mm).

25mm standard (eye to eye) micro F4 Flight Controller

Compare with traditional 35mm board

Connection Diagram (Click to Enlarge)

Software / Hardware Features
  • 8CH SBUS FrSky compatible onboard receiver (D8 Mode)
  • 2-4S Direct Lipo input support (5-16v)
  • Onboard 5v/2A and 3.3v/0.2A regulators
  • SBUS and PPM support
  • RGB LED dedicated pad and support
  • 3x UART Ports
  • Betaflight support (Supports new DSHOT protocol)
  • BLHeli passthrough flashing supported by hardware

  • STM32F405 (1MB flash) 32-bit processor
  • ICM-20608-G SPI Gyro/Accelerometer
  • High quality 1.6mm PCB
  • Micro USB connector for programming
  • Dimensions: 27x27x6mm (includes USB in height) (8mm tall with Rx board)
  • Mounting Holes: 20mm square to center of holes
  • Weight: 4.3g

Optional Accessories
We suggest the following gear to complete your micro brushless build. (* sold separately)
  • Lumenier Mini BLHeli_S 10A 4-in-1 or 20A 2-in-1 ESC DSHOT
  • Lumenier AIO-200 Mini FPV Camera + 200mW VTX
  • M3x3 Mini Spacers (No Thread, Set of 8)


  • 1x Lumenier MICRO Lux Flight Controller
  • 1x 8CH SBUS FrSky compatible onboard receiver (D8 Mode)
  • 8x Anti-Vibration Mounting Rings
  • 2x ESC Input cables

Payment & Security


Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed