Brainfpv RE1 Flight Controller 2-in-1

BarinFPVSKU: Barinfpv-Acc-RE1

Price:
Sale priceUSD $79

Description

GAME CHANGER
For RC Drone pilots, who need a high performance easy to use flight control system, BrainFPV RE1 (Racing Edition 1), is a flight controller that has a fully integrated graphical On-Screen-Display (OSD). Unlike any other flight controller, RE1's innovative design combines an OSD, a faster processor and the highest performance sensors all in one small package. Both dRonin and Betaflight are fully supported on RE1, allowing you to use your firmware of choice.

Features
  • SUPERIOR QUALITY- ASSEMBLED IN USA
    • We use only the highest quality components and a 6 layer circuit board for optimal signal integrity. RE1 is designed, assembled and tested using cutting-edge equipment by the best men and women in New England. *Lobster roll not included *

  • EFFICIENT AND POWERFUL - FASTER PROCESSOR
    • The latest and fastest STM32 F4 processor, running at 180MHz, enables RE1 to run advanced flight control code with ease.

  • FAST AND PRECISE - BETTER SENSORS
    • The latest accelerometers and gyroscopes from Bosch Sensortec running at 1.6kHz give RE1 unparalleled flight performance.

  • FUTURE PROOF - EXTENDABLE
    • Brilliantly designed with extendability in mind. Future accessory boards can be stacked on top of RE1, connecting to it using high speed interfaces without the fuss of wires. Yeah, we think ahead.

GRAPHICAL OSD
BrainFPV RE1 has an integrated full-graphic On-Screen Display (OSD). Having the OSD in the flight controller also saves you from the hassle of using a separate OSD, so you can keep your build clean and simple. Our OSD is fully configurable using the dRonin and Betaflight configuration software and also includes a menu to easily change settings in the field. This is not your old character-based OSD, it has advanced features, such as 3D support when used with a 3D camera (e.g. NerdCam3D Mk.2).

BUILT FOR RACERS - LAP TIMING
Participating in a race? We got you covered with RE1's integrated a multi-protocol (I-Lap, Trackmate) infrared (IR) transponder for lap timing. The transponder ID and protocol can quickly be changed in the field using the OSD menu. Race on!


BLING YOUR DRONE - MORE LIGHTS


SIMPLE AND CLEAN - STACKABLE DESIGN




Specifications
  • Processor: STM32F446RET6, Coretx-M4, 32bit, 180MHz, 128kB RAM, 512kB Flash.
  • IMU: Bosch Sensortec BMI160 running at 1.6kHz (dRonin) or 3.2kHz (Betaflight), connected using SPI.
  • OSD: Full-graphic, PAL/NTSC auto detect, adjustable black and white levels. 4 fully customizable pages (dRonin only) and a menu. Support for side-by-side 3D when used with a 3D FPV camera (e.g. NerdCam3D Mk.2).
  • Flash memory: 128Mbit (16MB) high-speed SPI flash memory with up to 0.5MB/s write/erase speeds.
  • PWM Outputs: 4 to 8 (8 if 2 serial ports are configured as PWM outputs) with normal PWM and OneShot (OneShot125, OneShot42, MultiShot) support.
  • Receiver Support: PPM, S.Bus (inverter built-in), DSM, HoTT. Selectable 5V or 3.3V supply for receiver. Receiver is powered from USB for easy and safe setup.
  • Telemetry Support: FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, UAV Talk, Light Telemetry. Built-in inverter for FrSKY telemetry.
  • Serial Ports: Up to 4 serial ports (including receiver input) when 4 PWM outputs are used (3 ports with 6 outputs, 2 ports with 8 outputs). Note: Betaflight only supports the 3 serial port / 6 PWM output option.
  • RGB LEDs: Dedicated hardware to control up to 1024 WS2812B RGB LEDs via SPI (up to 32 LEDs in Betaflight). The LED port uses 5V logic for direct compatibility with WS2812B LEDs.
  • IR Emitter: Dedicated hardware for infrared based lap timing with multi-protocol support (I-Lap, Trackmate).
  • Buzzer Port: Dedicated port for 5V (100mA max) buzzers (DC and 4kHz buzzers supported).
  • Analog Inputs: 3 analog inputs (3.3V max.) for voltage, current, rssi sensing.
  • Extension Port: Hirose DF40 connector with SPI, I2C, serial interfaces, power and GPIO signals.
  • Power: 4.5V to 5.5V, 150mA.
  • Dimensions: 36mm x 36mm, 30.5mm hole spacing.
  • Weight: 8 grams.



Payment & Security

PayPal

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed