Description
For those who do not want to do the soldering job, we can do it for you. We took a FrSky XSR receiver and solder it with the correct connector for the BeeRotor BRF3 Flight Contorller, there is a S.Bus port and Smartport on it now, works with FrSky Taranis X9D Plus Transmitter.
How to Bind?
Setup in BetaFlight Configurator
Features :
Specifications :
Suitable for : FrSky X-series Module (XJT etc. ) & Taranis X9D Plus in D16 mode (XSR does not work with D-series Module)
Useful Information :
"
How to Bind?
- Turn on your Taranis X9D Plus transmitter, goto ""Model Setup"", in the ""Internal RF"" section, choose Mode = D16, Channel Range = CH1-16, Receiver No. 01, and then click ""Bind"", the transmitter will start beeping.
- Power up the XSR receiver while holding the Bind button. The LED on the receiver will start flashing, that means binding has completed.
- Power off Transmitter and Receiver.
- Turn on the transmitter and power on the Receiver, you should see the Green LED on the receiver, that means it has bound with your transmitter.
Setup in BetaFlight Configurator
- Connect BRF3 controller to computer and ppen CleanFlight configurator
- In ""Ports"" page, for UART2, turn on SmartPort function, for UART3, turn on Serial RX function, then Save and Reboot
- Then goto ""Configuration"" page, in the ""Other Features"" section, turn on ""TELEMETRY"" function.
- Still in ""Configuration"" page, in the ""Receiver Mode"" section, choose ""RX_SERIAL"", and ""SBUS"" in the ""Serial Receiver Provider"" field.
- Now you've turn on SBus receiver function and Telemetry function in the CleanFlight.
Features :
- Controls up to 16 channels using S.Bus
- Smart Port enabled
- With external Analog Telemetry port (AD2)
- Lighter weight and physically smaller than X8R and X6R
- With RSSI PWM output (0~3.3V) on board
Specifications :
- Dimension: 26 x 9.2mm
- Weight: 3.8g
- Number of Channels : XSR - 16Ch (1~16ch from SBUS Channel, 1~8ch from CPPM Channal)
- Operating Voltage Range: 4.0~10V
- Operating Current: 100mA@5V
- Compatibility: FrSky X-series Module & X9D & X9DP &X9E & X12S in D16 mode. (XSR does not work with D-series Module)The LBT version of XSR receiver only works with FrSky D16-LBT Mode
Suitable for : FrSky X-series Module (XJT etc. ) & Taranis X9D Plus in D16 mode (XSR does not work with D-series Module)
Useful Information :
![]() |
"
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.