Free Upgrade to T-Motor F1507 Brushless Motor (3800kv), Runcam Swift Mini FPV Camera and HGLRC Zeus F728 Stack
Designed from ground up, full of innovations, meet the all new weapon for top level FPV racing
Storm Loki-X3 Storm Spec Edition
The Loki-X airframe is built for the new generation of FPV racing, it's one of the lightest airframe on the market delivering unparalleled handling and speed for every racer. Storm picked only the best material on the Loki-X3 racing drone, to build a well assembled, expert-tuned racing machine ready for any top level competition and any aggressive flying.
Storm Loki-X3 carrying GoPro Session 5
Storm Loki-X3 carrying Runcam 2.
Loki-X3 features :
- Palm size racer, more convenient and less stress to fly for everyone.
- Due to its mini frame size, the Loki-X3 is incredibly safe to operate.
- One of the few palm size frame that support the big 26mm camera (HS1177 standard), installed with RunCam Swift Mini FPV CCD Camera, excellent video quality for both indoor and outdoor
- Full 3K Carbon Fiber "Unibody" airframe featuring a solid 3mm main plate and 1.5mm top plate
- Super light setup, airframe weighs 31 g and all-up-weigh 184 g only
- Minimum surface area provides less drag
- Came installed with T-Motor F1507 Brushless Motor (3800kv) and HQ 3 x 3 x 4 props, more power, more flight time
- Motor to motor 130mm, very compact size for 3" Propellers
- Excellent handling, extremely agile, fast roll and stable pitch
- Super narrow arms of 9mm for best drag co-efficiency
- 7075 Aluminum screws included, 50% lighter than steel and iron screws
- "Bumpers" on the end of the arms to protect the motor during a crash, like all SRD series.
- HGLRC Zeus F728 Stack - F7 generation FC (w/ BetaFlight), Four 28A BLHeli_S ESC stack
- RunCam Swift Mini CCD FPV camera with high dynamic range which makes it good for both daylight and low light condition
- TBS Truimph 5.8Ghz Antenna to improve video quality
- Able to carry HD camera (such as the GoPro 4, RunCam Action Cam, or GoPro Session) with optional camera vibration mount (not included)
Designed by players, for playersDesigned from ground up, the all new Storm Loki-X series has all the new ideas such as the 9mm narrow arms, ultra-light carbon fiber main frame, 7075 aluminum screws... it has one goal in mind - to put you on the top of the podium.
3” propeller warriorThe pure racing machine with nothing unnescessary on the aircraft, designed to run with 3” propellers on a super compact airframe, feel the unparalleled agility from this palm size racer.
For serious racingThis is a pure racing machine with nothing unnescessary left on the aircraft, designed to run with 3” propellers, feel the unparalleled agility from this compact racer. Included are the lightweight 7075 Aluminum screws for maximum performance.
Super narrow armsThe arms on the Loki-X3 has a width of 9mm only to maximize integrity and minimize drag.
Optimized C.G.Well placed components improves C.G., hence better handling.
Support 26mm big cameraThe bigger the camera, the better the video quality, the frame is compatible with HS1177 standard size (26mm) camera.
Minimize vibration with damper stackEven the slightest vibration will affect the FC, Storm stacked a lot of soft silicon rings between the FC and the main frame, simple and effective, this damper stack can emlimate high frequency vibration and GREATLY improve FC’s performance.
Loki-X3 Storm Spec Components
- HGLRC Zeus F728 Stack F722 FC + 28A BL_S 4-in-1 BL32 ESC
- T-Motor F1507 Brushless Motor (3800kv)
- RunCam Swift Mini FPV CCD Camera
- EWRF TS5823 Pro 5.8Ghz VTX
- TBS TRIUMPH 5.8Ghz Antenna (RCHP)
- HQ Prop 3 x 3 x 4 propellers
High quality components, expert nothing less from Storm Racing Drones
Built-in OSD module on the Flight Controller
Storm Loki-X3 Specifications :
- Weight : 184g (without battery)
- All-up-weight : 260g (with 3S 850mah 50C battery)
- Dimension : 105mm (L) x 132mm (W) x 34mm (H) (without battery)
- Motor to motor : 130mm
- RC transmitter : optional
- RC receiver : optional
- Recommend battery : 3S 800mah to 1000mah LiPo
1. ☑ Fully Assembled Loki-X3
2. ☑ 6pcs Clockwise HQ 3 x 3 x 4 Propeller (4 of them are spare)
3. ☑ 6pcs Counter-Clockwise HQ 3 x 3 x 4R Pusher Propeller (4 of them are spare)
4. ☑ Battery mat
5. ☑ Storm lipo strap
6. ☑ Storm neoprene landing pads
7. ☑ 3-in-1 Multi-nut Wrench (10mm / 8mm / 5.5mm)
8. ☑ Free ActionCam Mount (Soft TPU) and strap
* RC Radio System sold separately
* Battery sold separately
* Charger sold separately
Useful Information :
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.