XERun-SCT Pro Brushless System (1:10 or 1:8 / 120A / 4168SD 2250kv Motor)

XERun-Acc-XERUN-SCT-4168SD

USD $174.90

XERun-SCT Pro Brushless System (1:10 or 1:8 / 120A / 4168SD 2250kv Motor) - XERun-Acc-XERUN-SCT-4168SD

This is a ESC specially made for Short Course Truck - XERUN SCT Pro 120A Sensored ESC
This Brushless System is the XERUN-SCT series, specially devloped for Short Course Truck (That's why it's called SCT), which is extermely famous in the US and Australia, this package comes with a 4168SD 4000KV Sensored Motor, super fast and high torque, a XERUN-SCT 120A Powerful ESC and a Program Card. Great choice for all 1/10th and 1/8th SCT/Buggy/Truggy RC Car Loveres, you will not believe "How Crazy" this burshless set can go!

Sensored vs Sensorless Motor?
In short, Sensorless motor sometimes have cogging problem, while the Sensored motor always know where did the inner rotor stoped and kick start more smoothly. But of cause, unless you are a hardcore player, otherwise you may not notice.

Super High Power XERUN-SCT Pro 120A Sensored ESC

Low resistance, USB Supported Programmable

Note that it does not have battery connector

You need to have your own connector.

4168SD 2250KV Sensored Motor

Because it's sensored, it kick start faster than "Sensorless" motor, combine with 120A ESC, you will get Excellent power!

LCD Programme Box

Get the best setup for different track

XERUN-SCT Pro 120A SD ESC Features
- Sensored ESC has the best control feeling.
- The built-in switching mode BEC has a powerful output to supply all electronic equipments even with 4S Lipo input.
- Excellent start-up, acceleration and linearity features.
- With 3 running modes: Racing mode (Forward), Forward/Backward mode and Rock Crawler mode.
- With 4 steps of maximum reverse force adjustment.
- Proportional ABS brake function with 5 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
- Compatible with mechanical disc-brake system.
- With 9 start modes (Also called "Punch" ) from "Soft" to "Very aggressive" to suitable for different tracks.
- Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
- With 8 steps of timing adjustment to get the best compatibility with various of motors.
- Easily program with only one button and compatible with pocket-sized LED Program Card and the Advanced LCD Program Box.
- ESC firmware updatable via an USB adapter on the Advanced LCD Program Box.
- The major electronic components are sealed against splashing water and dust.
- Stable and reliable.

XERUN-SCT Pro 120A SD ESC Specifications
Output : Continuous current 120A, burst current 760A
Input : 6-12 cells NiMH/NiCd or 2-4S Lipo
BEC Output : 6V/3A (Switching mode)
Resistance : 0.0004 Ohm
Motor Supported : Sensored and sensorless brushless motor
Suitable Brushless Motor :
With 6 cells NiMH/NiCd or 2S Lipo : KV≤6000;
With 7-9 cells NiMH/NiCd or 3S Lipo : KV≤4000;
With 10-12 cells NiMH/NiCd or 4S Lipo : KV≤3000;
Suitable Car : 1/10th and 1/8th scale short course truck / buggy / monster
Size : 53.5mm(L) * 36mm(W) * 36mm(H)
Weight : 89g

Xerun 4168SD 2250KV Sensored Motor Features :
- Excellent for 1:8th scale competition because sensored motor has the best control feeling
- High efficiency (>90%), the additional heat-sink is unnecessary in most applications.
- New design with lighter weight but bigger torque. - Higher power than the competition, faster acceleration and higher top speed
- Aluminum shell (case)
- High quality magnets
- Copper wires of high temperature endurance
- Good quality bearings
- Anti-broken rotor with special workmanship.

Xerun 4168SD 2250KV Sensored Motor Specifications :
- KV : 2250kv
- Diameter : 41mm
- Length Without Shaft : 68mm
- Shaft : 5mm
- Shaft Length : 18.5mm
- Weight : 340g
- Rm : 0.005 Ohm
- Max Volts : 18
- lo @ 10V : 2.4A@10V
- Continuous Watts : 1250W