Walkera WK2801-Pro 8-Channel 2.4Ghz Digital Radio System

Walkera-Acc-WK-2801PRO-COMBO

~~USD $299.00~~ USD $199.00

Walkera WK2801-Pro 8-Channel 2.4Ghz Digital Radio System - Walkera-Acc-WK-2801PRO-COMBO

One Transmitter for All Walkera's Helicopters - WK2801-Pro Digital Transmitter
If you are really interesting in remote control helicopter hobby, it is worth to invest on a high-end digital professional remote controller.

Comes to some Famous Janapese made model like Futaba and JR, if you want more functions and good looking product, it's simply about "How much you are willing to Pay". But this year, Walkera made some difference to this situation. You don't need to spend a lot of money to get both "Functions" and "Good Looking", presentating the Walkera 2.4Ghz WK2801-Pro Digital Transmitter and RX2801-Pro 8 Channel Dual Circuit Recevier. It is not only a piece of professional transmitter, you may also gain control over all Walkera's 2.4Ghz Helicopters, so you don't have to use your old 4 channel or 6 channel transmitter again.

WK2801-Pro Digital Transmitter Features
1. The WK2801-Pro adopts 2.4Ghz spectrum technology and features automatic code pairing and ID assignment.
2. LCD display of the WK2801-Pro is simple to understand and easy to set.
3. The transmitter case is ergonomically designed and the large LCD display has white backlight with easy-to-read graphics.
4. The length or tension of the controls stick can be adjusted and it is convenient to change the throttle from left to right.
5. The WK2801-Pro supports both helicopters and airplanes. It offers three helicopter flight modes and each flight mode is capable of free setting and adjusting parameter in order to suit the various requirements of F3C or 3D aerobatic flights.
6. Capable of wireless data copy and transfer between two transmitters.
7. Four Adjustable hot keys facilitate easy entry into the set menu.
8. Eight model memory storage.
9. Gyro rate adjustment by transmitter, and convenient programmed hover and 3D flights.

WK2801-Pro Digital Transmitter Specification
1. Encoder: 8 channel micro computer system
2. Frequency: 2.4Ghz spread spectrum
3. Output Power: 100Mw
4. Current Drain: 120mA
5. Power: 1.2V X 8 NiCard (9.6V600mAh) or 1.5V X 8 AA dry batteries

RX2801-Pro 8 Channel Dual Circuit Receiver Features
1. 8 Channel
2. Applying Dual Circuit design, providing High sensitivity and Anti-Interference functions
3. Able to use on Aeorplane or Helicopter hobby model

RX2801-Pro 8 Channel Dual Circuit Receiver Specification
1. Size : 40mm (L) X 28.5mm (W) X 14.5mm (H)
2. Sensitivity : 95dmb
3. Frequency Interval : >= 4m
4. Weight : 10g
5. Receiver Battery 4.8V 110mAh

Walkera is an aggressive helicopter manufacurer. It is expected that they will create a lot of amazing helicopters in the future, it is time to invest on this remote controller. It is a long term investment. You can use it for all other helicopters in the future as well.

This package includes :
1.

Walkera WK2801 Digital Transmitter
2.

Walkera RX2801 Dual Circuit Receiver

Product Status : In-Stock

Useful Information :

Get it now for ~~USD $299.00~~ USD $199.00 only!

Available Options:
Mode:

Current Reviews: 6

Similar Products

3 x Storm 3.7V 700mAh 20C LiPo Battery Pack (Enhanced)	5 x HM-4G6-Z-01 Main Rotor Blade Pack (Black)	5 x HM-4G6-Z-01 Main Rotor Blade Pack (Red)	Airy Carbon Blades (3K Carbon 142mm)
Airy Ergonomics Control Stick for Transmitter (Mode 1, 3mm)	Airy Ergonomics Control Stick for Transmitter (Mode 2, 3mm)	Airy Neck Strap Adapter (For Walkera and Esky)	Airy Neck Strap for All Transmitter
Airy Transmitter Stand	HM-4G3-Z-02 Flybar Set	HM-4G3-Z-03 Main Blade Holder	HM-4G3-Z-04 Flybar Steering Ball
HM-4G3-Z-05 Ball Linkage Set	HM-4G3-Z-06 Flybar Connector	HM-4G3-Z-07 Flybar Paddle	HM-4G3-Z-08 Swashplate
HM-4G3-Z-09 Guide Ball	HM-4G3-Z-10 Rotor Head Set	HM-4G3-Z-11 Main Shaft	HM-4G3-Z-12 Main Frame
HM-4G3-Z-13 Main Rotor Shaft	HM-4G3-Z-14 Blade Controller	HM-4G3-Z-15 Servo Holder	HM-4G3-Z-16 Main Gear
HM-4G3-Z-17 Battery Frame	HM-4G3-Z-18 Tail Boom	HM-4G3-Z-19 Skid Landing	HM-4G3-Z-20 Tail Gear
HM-4G3-Z-21 Tail Knighthead	HM-4G3-Z-23 Tail Motor Holder	HM-4G3-Z-24 Tail Motor Wire	HM-4G3-Z-25 Tail Rotor
HM-4G3-Z-26 Screw Set	HM-4G3-Z-27 Bearing Set	HM-4G3-Z-28 Main Motor	HM-4G3-Z-35 Main Blades Holder
HM-4G3-Z-37 Swashplate	HM-4G3-Z-38 Ball Linkage Set	HM-4G3-Z-39 Brushless Main Motor	HM-4G3-Z-40 Speed Controller for Brushless Main Motor (WK-WST-10A-L)
HM-4G3-Z-41 RX2605A Receiver (Upgraded)	HM-CB100-Z-22 Tail Motor Holder (V1.1)	HM-CB100-Z-26 Speed Controller (WK-WST-10A-L)	HM-V120D03-Z-02 Tail Rotor (Orange)
Micro Screw Driver Box Set	Multi Charge Cable (Walkera Plug)	SkyArtec Flight Simulator (4-Ch)	SkyArtec Flight Simulator (8-Ch)
Storm 3.7V 700mAh 20C LiPo Battery Pack (Enhanced)	Training Kit for Micro Helicopter	Walkera Original Metal Kit for 4G3 / 4G6	Walkera UB-01 Simulation Cable
Walkera WK2801-Pro 8-Channel 2.4Ghz Digital Radio System

Walkera WK2801-Pro 8-Channel 2.4Ghz Digital Radio System

Walkera-Acc-WK-2801PRO-COMBO

3 x Storm 3.7V 700mAh 20C LiPo Battery Pack (Enhanced)

5 x HM-4G6-Z-01 Main Rotor Blade Pack (Black)

5 x HM-4G6-Z-01 Main Rotor Blade Pack (Red)

Airy Carbon Blades (3K Carbon 142mm)

Airy Ergonomics Control Stick for Transmitter (Mode 1, 3mm)

Airy Ergonomics Control Stick for Transmitter (Mode 2, 3mm)

Airy Neck Strap Adapter (For Walkera and Esky)

Airy Neck Strap for All Transmitter

Airy Transmitter Stand

HM-4G3-Z-02 Flybar Set

HM-4G3-Z-03 Main Blade Holder

HM-4G3-Z-04 Flybar Steering Ball

HM-4G3-Z-05 Ball Linkage Set

HM-4G3-Z-06 Flybar Connector

HM-4G3-Z-07 Flybar Paddle

HM-4G3-Z-08 Swashplate

HM-4G3-Z-09 Guide Ball

HM-4G3-Z-10 Rotor Head Set

HM-4G3-Z-11 Main Shaft

HM-4G3-Z-12 Main Frame

HM-4G3-Z-13 Main Rotor Shaft

HM-4G3-Z-14 Blade Controller

HM-4G3-Z-15 Servo Holder

HM-4G3-Z-16 Main Gear

HM-4G3-Z-17 Battery Frame

HM-4G3-Z-18 Tail Boom

HM-4G3-Z-19 Skid Landing

HM-4G3-Z-20 Tail Gear

HM-4G3-Z-21 Tail Knighthead

HM-4G3-Z-23 Tail Motor Holder

HM-4G3-Z-24 Tail Motor Wire

HM-4G3-Z-25 Tail Rotor

HM-4G3-Z-26 Screw Set

HM-4G3-Z-27 Bearing Set

HM-4G3-Z-28 Main Motor

HM-4G3-Z-35 Main Blades Holder

HM-4G3-Z-37 Swashplate

HM-4G3-Z-38 Ball Linkage Set

HM-4G3-Z-39 Brushless Main Motor

HM-4G3-Z-40 Speed Controller for Brushless Main Motor (WK-WST-10A-L)

HM-4G3-Z-41 RX2605A Receiver (Upgraded)

HM-CB100-Z-22 Tail Motor Holder (V1.1)

HM-CB100-Z-26 Speed Controller (WK-WST-10A-L)

HM-V120D03-Z-02 Tail Rotor (Orange)

Micro Screw Driver Box Set

Multi Charge Cable (Walkera Plug)

SkyArtec Flight Simulator (4-Ch)

SkyArtec Flight Simulator (8-Ch)

Storm 3.7V 700mAh 20C LiPo Battery Pack (Enhanced)

Training Kit for Micro Helicopter

Walkera Original Metal Kit for 4G3 / 4G6

Walkera UB-01 Simulation Cable

Walkera WK2801-Pro 8-Channel 2.4Ghz Digital Radio System