The Flybarless Series Finally Arrives - Walkera V200D01 New Generation Helicopter
We all know that the Fixed Pitch Helicopter is better for beginners because of easier setup and less complicated parts than the Collective Pitch Helis, now the V200D01 has gone one step further, it has no Flybar, and added a 3-Axis gyro to help you to stabilize the helicopter, just like adding a Co-Pilot next to you. But for beginners, you may ask "Why Flybarless is good?". Please allow me to explain.
What is a Flybar?
The flybar is a short, thin metal rod placed on top of the helicopter. It is part of the rotor head’s structure, usually attached with a paddle on both ends. The flybar is a stabilizer. The heavier the paddle and longer the flybar, the more stable the heli. However, you can compensate by using the high-tech 3-Axis Gyro. The onboard RX2437V-D Super Controller makes the V200D01 fly so well that it performs just like an ordinary rotor head helicopter.
Why Make it “Flybarless?”
Flybarless means less moving parts. That saves energy and allows you to fly 20 to 30 percent longer. Also, less parts mean less repairing. Flybarless is the future of RC helicopters!
Difference between V200D01 and V120D01
V200D01 is bigger than V120D01, V200D01 is about the size of your Keybroad, V120D01 is about the size of your palm. V200D01 is evolved from CB180 series, many parts are common. V120D01 is evolved from 4#6 series, many parts are common.
What is 3-Axis Gyro?
3-Axis Gyro means it can sense X, Y and Z axis moments, that means body leaning forward / backward, body rolling left / right, tail drifting CW / CWW, it will constantly monitoring any off-balance in all directions, then it will give signals to all CCPM servos and Rudder servo to balance the helicopter, it works constantly and unless you have the helicopter drifts to much, you will not even notice the system exists, please take a look at the following picture.
3-Axis Gyro and Rudder Servo means good!
Tail rotor is used to generate wind to counter act the main rotor rotation. Precise of tail rotor wind is needed to keep the helicopter heading one direction. We usually have two ways in generating the precise of wind from the tail rotor, one is the Tail Motor, another one is sharing the power from the Main Motor by a tail drive shaft. Tail Motor is usually slower, it can't keep up the main motor's speed and causing the tail to drift while heli is going up and going down, usually low price model and small scale helis use a tail motor. The best solution is to have a Gyro and Rudder Servo. By changing the Tail Rotor blade pitch, you can adjust the amount of wind generating to keep the heli in one heading, to do this, you need a good performance gyro constantly monitoring the heli heading and give correction to rudder servo, then it will push the tail rotor pitch. You will not imagine how quick it worked during the flight, but it is the heart and soul for any RC helicopter.
 Breakthrough in RC Helicoper - They go Flybarless!
Flybarless Rotor Head - No complex parts, light weight
Aluminum CNC Parts - Durable and Precise, important for any players
Simplify Mechanism - A clever design, easier to repair
Combination that can't go wrong - High Speed Rudder Servo and Shaft Driven Tail Rotor, built for performance
Overall Length - 432mm
Main Rotor Diameter - 420mm
All-up Weight - 288g (Battery included)
Good Looking Canopy - Makes you "Feel" like and Expert!
The new 2402D Digital Transmitter
 Thanks for the success of the top of the line WK2801 transmitter, Walkera used the same appearance and make the new 2402D Channel LCD display, 2.4Ghz Digital Transmitter. No need to flick switches at the back, no need to guess which button is for which purpose, by using the new 2402D transmitter, you can simply adjust the channel trimmings, servo directions or throttle modes from the LCD display.
Features
1. The 2402D adopts 2.4Gig spectrum technology and features automatic code pairing and ID memory.
2. LCD display of the 2402D is simple to understand and easy to set.
Specification
1. Encoder: 4 channel micro computer system
2. Frequency: 2.4G spread spectrum
3. Power: 1.2V X 8 NiCD (9.6V600mAh) or 1.5V X 8 AA dry batteries
HeliPal.com Sends You Everything!
Do you know? Some online sellers on the market keep some items to make more profit
such as remote controller, Li-Po battery, battery charger or something’s you can't imagine.....
WE PROMISE THAT WE WILL SEND YOU EVERYTHING!
This package includes :
1. 2402D 4-Ch 2.4G Remote controller
2. Pre-assembled Helicopter
3. Battery Charger
( Suitable for your country )
4. 7.4V 1000mAh Li-Po Battery
5. Adjustment Tool
6.Instruction Manual
7. Extra 1 Pair of Main Blades
8. Extra 1 Set of Gears
HeliPal.com Checks and Calibrates Every Single Helicopter Before Shipping!
Do you know how important is it? Trust me, it is VERY IMPORTANT!
Many online sellers don't check and calibrate their products at all because it requires experienced rc pilots and it is very time consuming as well. Helipal.com team checks & calibrates every helicopters, Battery and Battery Charger to ensure everything is in good condition!
HeliPal.com Sends You Correct Power Adapter and Frequency!
There are too many types of power adapters in the world. For example, the power adapter for UK cannot be used in USA. We know the standard of your country and we will send you the correct one. The frequency is different for different countries as well. If you have no idea on what frequency should be used for your country, we will send you the correct one.
Suitable for :
V200D01 is a indoor size helicopter using a 3-Axis Gyro and Flybarless Rotor Head. Flybarless Helicopters are hard to make because they requires very complex electonics to make the helicopter stable, Walkera has the technology to make it happen and has become a giant in the industry. We tested this helicopter and result is positive, very stable and agile. We recommend this helicopter with training kit for all players with experience on Co-Axial helicopter before. V200D01 has less moving parts (fewer things to repair) and longer flight time, should be every flyers’ dream.
Explosion Diagram for V200D01 (click to enlarge)
Product Status : In-Stock
Get it now for USD $339.00 USD $199.00 only!
| Available Options: |
| Alumnium Case: |
|
| Extra Battery: |
|
| Harden Blade Pack: |
|
| Mode: |
|
| Simulator Cable: |
|
| Training Kit: |
|
|
Home
Products
What's Hot
RC Helicopters
Select By Skill Level
Beginner
Intermediate
Expert
Select by Brand
Walkera
Storm
DJI
Hubsan
ESky
Nine Eagles
Align
ALZRC
JC
GW
WFLY
SYMA
UDI
Art-Tech
Attop
F1
JXD
Swift
WL
Select by Size
Micro Size
200 Size
250 Size
300 Size
350 Size
400 Size
450 Size
500 Size
600 Size
700 Size
Select by No. of Channels
2 Channels
3 Channels
4 Channels
6 Channels
Select by Type
Quadcopter
Aerial Filming
Flybarless
Coaxial
Palm Size
Body Kit
4 Channels Fixed Pitch
6 Channels CCPM (3D)
Tandem Rotor
Fuselage Style
Funny Stuff
RC Helicopter Parts
General Accessories
Auto Stabilizer
BEC
Helicopter Canopies
ESC
Gadgets
Gyro
LED Light
Motor Pinion Gear
Motor
Protection Case
Rotor Blades
Servos
Training Kits
Walkera Parts
Align Parts
Storm Parts
ESky Parts
Hubsan Parts
DJI Parts
Art-Tech Parts
Attop Parts
F1 Parts
GFly Parts
Great Wall Parts
JXD Parts
Lotus Parts
SWIFT Parts
Syma Parts
UDI Parts
WL Toys Parts
Others RC Stuff
RC Planes
Hubsan Planes
Nine Eagles Planes
Toy Planes
RC Plane Parts
General Accessories
Hubsan Plane Parts
Nine Eagles Plane Parts
RC Car
Tamiya Car
HSP Buggy (1/10)
HSP Drifter (1/10)
HSP Rally (1/10)
HSP Rock Crawler (1/10)
HSP Touring (1/10)
HSP Truck (1/10)
HSP Cars (1/16 or 1/18)
HSP Buggy (1/18)
HSP Drifter (1/18)
HSP Racer (1/18)
HSP Short Course (1/18)
HSP Truck (1/18)
RC Truggy (1/18)
RC Toy Car
RC Car Parts
General Accessories
Brushless Motor System (1/8)
HSP Gears
HSP Parts
HSP Bodies
HSP Buggy (1/10) Parts
HSP Drifter (1/10) Parts
HSP Nitro Car ( 1/10) Parts
HSP Rally (1/10) Parts
HSP Rock Crawler (1/10) Parts
HSP Touring (1/10) Parts
HSP Truck (1/10) Parts
HSP Buggy (1/18) Parts
HSP Drifter (1/18) Parts
HSP On-Road (1/18) Parts
HSP Short Course (1/18) Parts
HSP Truck (1/18) Parts
HSP Truggy (1/18) Parts
RC Bikes
RC Bikes Parts
RC Tanks
Other RC Toys
Batteries and Chargers
Battery Monitor
Battery Protection Bag
Connector / Adapter
Chargers / PSU
SkyRC Charger
Tools
Ball Joint Removers
Blade Balancer
Drill Set
Gear Puller
Hex Screwdrivers
Nut Drivers
Measuring Tools
Micro Screwdrivers
Tool Sets
Tweezers
Others
Swashplate Leveler
Testimonial
FAQ and TIPS
Support
Contact Us
Shipping Status Tracking
