TREX 500E Pro Super Combo

Align-Heli-KX017015

~~USD $839.99~~ USD $689.00

TREX 500E Pro Super Combo - Align-Heli-KX017015

Introduction of the T-REX 500E Pro:
1. Following the design and manufacturing excellence of Align, T-Rex 500E Pro is a new generation of 500 class helicopter with exclusive innovations.
2. Utilizes new style 500 rotor head, with 3 sets of positive/negative deltas and numerous Bell/Hiller mixing ratios to provide both stability and agility, improving the stability and controllability of the helicopter. Composite technology is used throughout the side frames which cleverly strengthen the weak areas, and eliminated servo mounting nuts to simplify maintenance at the same time. Removable gyro mounting platform and receiver mount are more rigid and ergonomically friendly. Rudder servo is mounted inside the frame for more central CG point to improve 3D performance, as well as minimize crash damage to the servo. Superior quality tail gear box, thicker stronger side plates around tail drive crown gear. Newly designed dual bearinged tail blade grips for zero slop rudder control precision and ultimate tail locking performance. At the heart of the helicopter, the high efficiency Align MX series motor provide continuous power.
3. T-Rex 500E Pro features high stability, excellent gust resistance, superior control feel, and being 500 is just the right size/price, it is the ultimate choice for enthusiasts.

Features of the T-REX 500E Pro:
1. New style 500 rotor head, with 3 sets of positive/negative deltas and numerous Bell/Hiller mixing ratios.
2. Unique carbon composite technology which effectively strengthen the weak areas and simplify electronics installation.
3. Servos can be mounted directly onto frame without mounting nuts.
4. Rear in-frame rudder servo mount design for centralize 3G for best 3D performance.
5. Equipped with MX series high efficiency brushless motor, with heatsink style casing and embedded fan to dramatically improve cooling and increase power output.
6. Unique fast release gyro and receiver mount design for fast removal and sturdy attachment.
7. Uses high precision slant tooth (helical) main gear, with higher load sustainability and lower noise output.
8. Brand new tail gear box with higher material quality and easy maintenance.
9. Newly designed dual bearinged tail blade grips for zero slop rudder control precision and ultimate tail locking performance.
10. Highly efficient shaft driven tail system which effectively reduce power loss found on belt driven system, and at the same time increase performance during flight.
11. Brand new 4mm carbon rudder control rod and metal rudder pitch bell crank to further improve the rudder locking effect and controllability.
12. New style battery mounting platform to strengthen frame as well as provide mount for electronic speed controller.
13. New style lower CG landing gear.
14. Newly styled aerodynamically canopy for the ultimate fit, making the helicopter stand out.

Users must have a certain concept of security to operate the R/C helicopters.
Be sure to read and comply with related safety notes of instruction manual before flying.


Focus Shot 1 (New style 500 rotor head, with 3 sets of positive/negative deltas and numerous Bell/Hiller mixing ratios )	Focus Shot 2 (Newly designed electronic equipments and ESC mount )

Focus Shot 3 (High precision bearing mixing arms)	Focus Shot 4 (Unique carbon composite technology which effectively strengthen the weak areas and simplify electronics installation )

Focus Shot 5 (Newly Metal Anti Rotation Bracket)	Focus Shot 6 (Newly designed Gyro and Receiver mount)

Focus Shot7 (Brand new carbon tail control pushrod assembly )	Focus Shot 8 (High efficiency shaft tail drive system )

Focus Shot 9(Metal tail control arm with wearproof sleeve )	Focus Shot 10 (Newly styled aerodynamically canopy)

Focus Shot 11 (500MX Brushless Motor)	Focus Shot 12 (425 Carbon fiber blades )

Focus Shot 13 (DS510M standard servo )	Focus Shot 14 (DS520 standard servo and RCE-BL70G Brushless ESC)

Focus Shot 15 (GP900 gyro)

Specification (Trex 500E Pro) :
● Length : 868mm
● Height : 308mm
● Width : 161mm
● Main Blade Length : 425mm
● Main Rotor Diameter : 978mm
● Tail Rotor Diameter : 206mm
● Motor Drive Gear : 12T
● Main Drive Gear : 134T
● Autorotation Tail Drive Gear : 145T
● Tail Drive Gear : 36T
● Drive Gear Ratio : 1:11.17:4.03
● Weight(With Motor) : 1295g

Included Accessories :
● T-REX 500E PRO Kits Set X 1
● Aluminum Tail Boom X 1
● 425 Carbon fiber blades X 1
● 500MX Brushless Motor X 1
● DS510M Digital servo X 3
● DS520 Digital servo X 1
● GP900 Head Lock Gyro X 1
● RCE-BL70G Brushless ESC X 1

Radio transmitter and electronic equipment required for assembly:
● Transmitter (7-channel or more, helicopter system)
● Receiver (7-channel or more)
● 6S Li-Po 2600 ~ 3300mAh
● Dial Pitch Gauge