For hobby and professional use, gives you perfectly leveled video footage at all time - Tarot GoPro HERO 3 Gimbal
This is a piece of high end camera equipement, driven by Brushless Motor to give you the fastest and smooothest respond, no matter how you move the drone, the camera will still give you perfectly leveled image! Using the latest 3-Axis Gyroscope technology, it picks up the sligtest movement on the drone and tell the brushless motor to compensate, the motion is seamless, like magic. The gimbal has a Pitch (Tilt) angle control, you can plug it into a empty slot on your RC transmitter or use another remote controller and ask another guy to take control of the Tilt angle, that will make the footage look good. This is Hollywood grade technology, but thanks to the enthusiasts now you get this technology at great value, make your own video like the one you saw on TV or in the movies! Get this, you will not regret it.
This brushless motor gimbal will make the GoPro HERO 3 always leveled, no matter how violent the drone moves, it stays still like magic!
Besides install a Tarot T-2D on a hexacopter to take videos in the sky, you can install a T-2D to anything you want. In this video, we combined a T-2D to a "Gopro Suction Cup Mount" and suck it on a motorcycle.
Control the Tilt angle of the gimbal thru Transmitter
You can tilt the camera as your like, even Face Down.
Made for the Tarot FY650 / FY680
It came with hooks that is exactly fit on the Tarot FY650 / FY680 Rail Mount. However, you can remove that hook and use 3M Double Side Tape to stick the gimbal anywhere you.
- Support GOPRO Hero3 video auxiliary output
- Supply voltage polarity protection and voltage compensation
- Motor drive end short-circuit protection
- Custom initial pitch angle
- Sensitivity parameter adjustment and software 3D pose show thru PC Connection
- Adjustable rocker rate mode and position mode
- Supported receiver type : conventional receiver, S-BUS receiver, DSM2/DSMJ/DSMX receiver
- Support for remote devices : PPM/PCM/2.4G
- Working voltage : DC 7.4V ~ 14.8V (Recommended 12V, three lithium battery)
- Working current : 200mA-500mA (power supply voltage and the motor related)
- Working environment temperature: -15 ℃ ~ 65 ℃
- Processor: Dual 32-bit high-speed ARM core processor
- Sensor : Three axis MEMS gyroscope and MEMS accelerometers
- Maximum angular rate : 2000 ° / sec
- Maximum acceleration : 16G
- Control frequency: 2000Hz
- Motor drive frequency: 20KHz (no noise smoothing driven)
- Control accuracy : 0.1 ° (Pixel Grade)
- Control angle range : -45 ° ~ 45 ° (roll), -135 ° ~ 90 ° (tilt)
- Pose solver algorithms : PTZ dedicated brushless motor decoupled EKF algorithm
- Shooting equipment : GOPRO Hero 3
- Weight without camera : 200g
Put it on :
- Most of the drone on the market with 110mm ground clearance, e.g. DJI F450, F550, Storm Drone 6 GPS (use zip ties to attach on the drone)
This package includes :
1 X Tarot GoPro HERO 3 Gimbal (Assembled is required)
1 X Damper Mount
2 X Hooks for Tarot FY650 / FY680 Hexacopter
Suitable for :
This gimbal will fit most of the 4 to 6 Rotors drone on the market, but modifications may required for different platforms, like the Phantom 1, you need to purchase the Tarot TL68A13 Phantom Adapter
: In-stock now
Get it now for
USD $299.00 USD $199.00 only!
|Assembly and Calibration Service: