Detachable Main propeller, that solves the transportation problem!
This is a Self-Tightening Propeller Mount for big drones, CNC from a block of aluminum alloy and then anodised with Orange and Gray, representing CCW and CW direction accordingly. Once installed on a motor, you can easily put on the prop or remove it by hand, no tools is needed. We have one set of Orange mount and Gray mount in the pack (that's for Two
motors, if your drone is a Hexacopter, that means you need Three Packs
), the Orange mount for Counter-Clockwise motor, the Gray mount for Clockwise motor, please so don't mix up.
Install the "Upper Mount" on the propeller side
First, put the "Upper Mount" on the propeller with Two Button-head Screws (M3 x 8mm, they are included in the pack), Orange
one on the Counter-Clockwise Propeller, Gray
one on the Clockwise Propeller.
Install the "Lower Mount" on the motor side
Then, put the "Lower Mount" on the motor with Two or Four Inner-Hex bolts (included in the pack), Orange
one on the Counter-Clockwise Motor, Gray
one on the Clockwise Motor.
Put them together
Then put the Propeller on the Motor, Orange
Now rotate the Propeller to sercure them
You do not need any tools to do them, rotate the propeller according to the White Arrow on the propeller mount, this is the "Tightening" direction. This design will make the propeller tightened even more when motor spins. To remove the propeller, simply rotate the propeller in the opposition direction of the White Arrow.
This package includes :
1 Set of Orange
1 Set of Gray
8 X Inner-Hex Bolts for motor (M3)
4 X Button-head Screws for propeller (M3 X 8mm)
:Motors with Two mounting holes with M3 size, 12mm spacing (All Tarot Motor fits)
Get it now for
USD $15.90 USD $12.90 only!