Free Upgrade to BrotherHobby Tornado 2205-2300kv To brushless motors
The athlete from Korea! A light weight, super stiff, removable arms and finely tuned airframe for high performance FPV Drone Racing
XBEE-X V2 Storm Spec
XBee is a new brand of FPV racing drone frames, which was first designed by the owner to enjoy the jobby, but then many users in Korea requested for mass production. The XBEE-X V2 is an exciting new racing frame, well designed that is equaly good at home freestyling as it is racing. The built-in GoPro mount incliner included and rounded edge arms, the new XBEE-X frame are sure to be winners.
The X airframe implements 4mm thick removable arms
with round corner finishing and supports 5" propellers
carbon fiber top plate and bottom plate giving you the best of both durability and performance.
Installed with the famous BrotherHobby Tornado Motor and T-Motor 4-in-1 35A ESC
Default with the powerful BrotherHobby Tornado motor, T-Motor FPV 35A 4-in-1 4S ESC BLHeli_S w/ Dshot
and the latest F4 Generation FC
, they will take you to a whole new level of FPV racing performance and dream-like handling experience like you've never seen before. This drone is perfect for both LOS (Line of Sight) and FPV (First Person View) players, very easy to control, sharp and precise handling. Compact frame design has the best C.G. and well balanced in both pitch and roll axis, perfect center of gravity in the middle which is considered a great advantage for freestylers who do some crazy move in speed.
XBEE-X V2 airframe features :
- Made in Korea!
- Tiitanium screws
- Full Carbon Fiber
- 2mm Bottom Plate, 2mm Top Plate and 4mm arms
- Matek PDB include(PDB-XPW W/ CURRENT SENSOR 140A & DUAL BEC)
- Tiitanium screws
- Transmitter mount include
- Wheelbase 220mm
- Ariframe weight 90g
All high-end components!
XBEE-X V2 is a light weight, super stiff, finely tuned airframe from Korea
aim for high performance FPV racing, packed with the famous BrotherHobby Tornado motors, F4 FC and T-Motor 35A ESC
, it has one goal in
mind - to put you on the top of the podium.
Quick swap arms
Inside the main frame there is a X shape plate with threaded rivet
to hold the arms screw, just need a 2mm hex screwdriver to do the arms replacement.
Super lightweight for a removable arm design
The XBEE-X V2 has a excellent power-to-weight ratio, prepare for the ultimate FPV excitement.
Extra low C.G.
Thanks to the highly integrated FC and ESC, the XBEE-X V2 has a low profile body, this gives better C.G. and improves performance.
Perfect fit with Foxeer HS1190 CCD camera
Using metal casing makes it more durable, support 5~40V DC input voltage, built-in OSD (voltage, time, call sign), adjustable mount allows you to tilt camera angle, built-in MIC for more immersive FPV experience.
Monstrous Power System - 3S or 4S Ready!
Compatible with 3S or 4S LiPo, it's a direct swap with no settings required. You can have different flight performance according to your needs.
Don't have time to build one?
Dedicated ActionCam Mount
Built-in removable cam mount, great to use with Gopro Session or similar action cameras.
We build it for you!
We have years of experience in this field and learned a lot of know-how on how to build a good FPV racer, we care about details and expect nothing less from our RTF or BNF aircraft, we also provide different spec built for different experience, each drone is built and tested by Storm factory guys to ensure you'll get a truly world class, out-of-box ready to fly FPV racer. Preloaded with Storm tuned 3 Flight mode + 3 Speed mode, everyone can enjoy, from beginners to experts.
The XBEE-X V2 includes our exclusive BetaFlight Parameters!
World class FPV racer, ready to fly!
In a hurry to get into the air? We build it for you.
Pr-loaded with three flight modes and three speeds.
The Angle Mode
is auto-leveled making is a no-stress flying experience for the complete beginner or for flight training.
In Horizon Mode
the drone is no longer limited by angle, allowing you to do flip and roll, auto-leveling directly after performing the trick.
In Rate Mode
, the drone will fly like an airplane with no auto-leveling or angle limitation, making it great for flying around in large spaces.
These flight modes are completely unique to the XBEE – there is nothing else like it on the market.
Using rubber dampers for the FC to minimize the vibration, very important for F4 generation FC
XBEE-X V2 Storm Spec Components
High quality components, expert nothing less from Strom Racing Drones
The XBEE-X V2 Storm Spec has the most high-end components on-board, this is surely one of the finest FPV race drone you can get today.
XBEE-X V2 Storm Spec Specifications :
Built-in BetaFlight OSD
The OSD tells you crucial flight data such as main battery voltage, flight mode and flight time, and it's user configurable.
This package includes :
- All-up-weight : 309 g
- Dimension : 189mm (L) x 189mm (W) x 36mm (H) (w/o battery)
- Motor to motor : 220mm
- Battery : Recommend 3S 1500mah or above / 4S 1300 to 1500mah 50C or above LiPo (* sold separately)
- RC transmitter : optional
- RC receiver : optional
Fully Assembled XBEE-X V2 5" Storm Spec
6pcs CW Gemfan FLASH 5152 3-blade propeller (* optional color)
6pcs CCW Gemfan FLASH 5152 3-blade propeller (* optional color)
XBEE lipo strap
3-in-1 Multi-nut Wrench (10mm / 8mm / 5.5mm)
* RC Transmitter sold separately
* Battery sold separately
* Charger sold separately
Useful Items :
* This BNF drone has no batteries and charger included, you'll need your own battery, charger and RC transmitter to fly.
* Receiver is
optional, the default receiver is a RadioLink R9D which is compatible for RadioLink AT9 / AT9S transmitter. You can choose to upgrade to a FrSky receiver.
* If you wish to further develop in this hobby, we recommend you purchase the FrSky Taranis X9D Plus RC transmitter, it gives you better compatibility in the future.
* We recommend you get a lot of spare propellers.
* Get some extra batteries
Useful Information :
Get it now for
USD $499.00 USD $359.00 only!