Shendrones Rapture T-Motor Spec
The Rapture is a 250 x 180mm stretch plus frame with a 3D printed nylon aero canopy. The base is 3mm carbon, and the canopy is printed from either white Taulman 645 nylon, or black HP Fusion nylon. The two prints are of similar strength, but the HP canopy is higher res for lighter weight and superior aesthetics (you can see the difference in picture).
The Rapture's arms are narrow and streamlined to maximize the thrust coming off the props, and its main body is aero to minimize drag. Depending on the setup, the Rapture's arms can save up to 240 grams of thrust.
Frame weight is 98 g for black HP, 102 g for white Taulman 645.
The Rapture takes a 4 in 1 esc that is no wider than 36mm, such as the Aikon. A pigtail vtx with remote channel changing capabilities is recommended. The camera mount is for HS1177 form factor cameras with 2.1 or 2.5 lenses. Click stops for the camera are at 30, 45, and 60 degrees.
Read about its development here
Shendrones Rapture features :
- Designed and manufactured by the famous Shendrones
- Unique smoothly shaped aeropod (Orca-style) with Taulman 645 nylon or black HP Fusion nylon
- Unique long Plus Quad design
- Full Carbon Fiber "Unibody" airframe featuring a solid 3mm main plate
- Clean build with 35A 4-in-1 ESC
- Loaded with a massive power-plant (T-Motor F40 III V3 motor)
- Soft TPU bumpers on the end of the arms to protect the frame during a crash
All high-end components!
The Shendrones Rapture is a unique Plus Quad design
and finely tuned airframe for
high performance FPV racing, packed with the famous T-Motor motors, F4 FC and T-Motor 35A 4-in-1 ESC
for cleanest built.
One seamless shape aeropod
Entire pod has a tangent transition to the carbon, long plus format may give the rear prop the cleanest air, smoothly shaped aeropod would send much less turbulence to the rear prop than a flat top plate, and looks very cool in the air.
Lightweight and high strength 5" racer
Pure racing machine with nothing unnecessary left on the aircraft.
Don't have time to build one?
Monstrous Power System - 3S or 4S Ready!
Compatible with 3S or 4S LiPo, it's a direct swap with no settings required. You can have different flight performance according to your needs.
We build it for you!
We have years of experience in this field and learned a lot of know-how on how to build a good FPV racer, we care about details and expect nothing less from our RTF or BNF aircraft, we also provide different spec built for different experience, each drone is built and tested by Storm factory guys to ensure you'll get a truly world class, out-of-box ready to fly FPV racer. Preloaded with Storm tuned 3 Flight mode + 3 Speed mode, everyone can enjoy, from beginners to experts.
The Shendrones Rapture T-Motor Spec includes our exclusive BetaFlight Parameters!
World class FPV racer, ready to fly!
In a hurry to get into the air? We build it for you.
Pr-loaded with three flight modes and three speeds.
The Angle Mode
is auto-leveled making is a no-stress flying experience for the complete beginner or for flight training.
In Horizon Mode
the drone is no longer limited by angle, allowing you to do flip and roll, auto-leveling directly after performing the trick.
In Rate Mode
, the drone will fly like an airplane with no auto-leveling or angle limitation, making it great for flying around in large spaces.
These flight modes are completely unique to the Shendrones – there is nothing else like it on the market.
Shendrones Rapture T-Motor Spec Components
High quality components, expert nothing less from Strom Racing Drones
Packed with the most high-end components on-board, this is surely one of the finest FPV race drone you can get today.
Shendrones Rapture T-Motor Spec Specifications :
Built-in BetaFlight OSD
The OSD tells you crucial flight data such as main battery voltage, flight mode and flight time, and it's user configurable.
This package includes :
- All-up-weight : 342 g (w/o GoPro Session)
- Dimension : 300mm (L) x 220mm (W) x 75mm (H) (w/o battery)
- Motor to motor : 250mm (pitch) / 180mm (roll)
- Battery : Recommend 3S 1500mah or above / 4S 1300 to 1500mah 50C or above LiPo (* sold separately)
- RC transmitter : optional
- RC receiver : optional
Fully Assembled ShendroneRapture 5" T-Motor Spec
6pcs CW RaceKraft 5046 TCS 3-blade propeller (* default is purple color but depends on availablility, otherwise we'll pick you another color)
6pcs CCW RaceKraft 5046 TCS 3-blade propeller (* default is purple color but depends on availablility, otherwise we'll pick you another color)
3-in-1 Multi-nut Wrench (10mm / 8mm / 5.5mm)
* RC Transmitter sold separately
* Battery sold separately
* Charger sold separately
Useful Items :
* This BNF drone has no batteries and charger included, you'll need your own battery, charger and RC transmitter to fly.
* Receiver is
optional, the default receiver is a RadioLink R9DS which is compatible for RadioLink AT9 / AT9S transmitter. You can choose to upgrade to a FrSky receiver.
* If you wish to further develop in this hobby, we recommend you purchase the FrSky Taranis X9D Plus RC transmitter, it gives you better compatibility in the future.
* We recommend you get a lot of spare propellers.
* Get some extra batteries
Get it now for
USD $499.00 USD $359.00 only!