enlarge the image
The New STORM 450 Glass Fiber Edition
The Most Awesome 3D Radio-Controlled Helicopter!
After years of refinement, we proudly present the new STORM 450.
STORM 450 Glass Fiber Edition is a 2.4GHz CCPM 3D RC helicopter for outdoor use. It is one hundred percent pre-built and ready to fly out of box! For the price you get all the good equipments you need to perform a beautiful flight. Full Aluminum Upgrades, Storm 3800KV brushless motor, Storm 30A ESC, Storm Rock-5 AVCS head lock gyro with Storm MS-110G Metal Gear Servo, three Storm MS-90G super fast servos, Storm 11.1v 2200mAh 20C Li-Po battery, WFLY WFT07H 2.4GHz LCD Display radio system with full settings, glass fiber canopy, glass fiber main blades, high-strength ball links and stainless steel linkage balls on the whole unit featuring wear resistance and anti-oxidization. This new STORM 450 Glass Fiber Edition is the best choice as your first outdoor helicopter!
What About STORM Brand?
The STORM 450 prototype was first launched four years ago. The one you see now is the Forth generation. The company that builds the STORM 450 is very positive and aggressive. They made it better and better over the years. You may not have heard about the STORM brand, but in Asia and Hong Kong the brand is very well known for its quality and performance. They have a good spare parts supply, good pricing, and we know you’ll be satisfied.
Perfect for Outdoor Flying!
The size is ok to fly in light breeze, and the Collective Pitch Rotor Head can give you the power to fight wind.
enlarge the image
Top of the line material
Made of Glass Fiber and Aircraft Grade Aluminum, light weight, precise and durable.
enlarge the image
Aggressive 3D Action
This heli has collective pitch control that will let pilots fly in any direction. Transitioning from forward flight to hover with smooth, solid control is a cinch, and negative pitch is a breeze for aerobatic loops and rolls. The STORM 450 Glass Fiber Edition also uses a combination of tough, lightweight aluminum and updated composite parts, and is designed and equipped to be capable of the most extreme 3D maneuvers !
enlarge the image
enlarge the image
One Hundred Percent Pre-Assembled
This heli is 100% assembled. You can have it flying in just a few minutes, right out of he box. Just make a quick change of the battery and you’re ready for lift off!
Precise and Efficient
Using the basics of micro electric design to keep components light and durable while distributing heat away from the electronics, the STORM 450 Glass Fiber Edition is not only precise, but also efficient. When you combine precision and efficiency and add beauty, you will have the STORM 450 Glass Fiber Edition :
The Ultimate super electric helicopter!
enlarge the image
The Best Flight Control System
Using Ball and Hiller two systems mixing control. Through simple structure of Ball control system, power-saving of Hiller system and CCPM control, can simultaneously control 3 servos for AILE, EVLE, PIT 3 actions. This CCPM control system is great for 3D flying control and extending life cycle of servos.
Strom 450 Throttle Range Setting (Only need to do it Once)
enlarge the image
Best Center of Gravity
STORM 450 has the newest designed servo mount and body frame. It moves the center of gravity closed to rotor blade, and can adjust the center of gravity according to the weight of battery, it reduces the correction when the heli rolling.
enlarge the image
High Performance Power System
This helicopter is combined with STORM 3800KV high performance brushless motor and 30A STORM Speed Controller for great power and efficiency. The brushless motor is equipped with out-runner cooling system. It solves the over-heat problem of many brushless motor on the market. Better cooling makes longer flight time and more aggressive 3D flight available. Also included in this ready-to-fly kit is a 11.1v
Lithium battery with high capacity (2200mAh) and high output 20C discharge rate.
High Quality Aluminum CNC CCPM System
STORM 450 Glass Fiber 2.4GHz RTF Edition uses a combination of tough, lightweight Glass Fiber, aluminum and updated composite parts and is designed and equipped to be capable of the most extreme 3D maneuvers. It has full aluminum upgrades including CNC Main Blade Grips, CNC Main Rotor Hub, CNC Washout Set and CNC Swashplate for precision and smooth movements.
enlarge the image
STORM MS-90G High Speed Servo
STORM FORCE MS-90G High Speed Servos provides fast and responsive control for the CCPM System.
High Precision Head Lock Gyro
STORM ROCK-5 Head Lock Gyro is the best Head Lock Gyro for helicopter in this class. It is powered by the best AVCS circuit, which stabilize the helicopter dramatically by controlling the angle of tail rotor. Since rudder trim changes caused by side-wind and other meteorological changes, and varieties of helicopter attitude changes are automatically cancelled, tail rudder operation becomes easy, making it easier to hover or 3D actions. It is perfect for both beginners and experts.
enlarge the image
STORM MS-110G Metal Gear Servo
We put it on the rudder, good speed and good durability, it is using real Metal Gears, they do not break easily during a crash, they were specially made for the job!
High Quality Aluminum CNC Tail Gear Box
The fully upgraded tail gear box includes CNC Tail Push Rod Support, CNC Tail Gear Case, CNC Tail Pitch Lever and CNC Tail Rotor System. Tail rotor control set is
equipped with dual bearing, features CNC control piece and smooth structure design.
enlarge the image
Smooth Pitch Travel
The Tail Boom is made of High Rigidity Aluminum CNC tail pulley assembly and tail holder are using high rigid aluminum alloy, features wear resistant and falling resistance.
enlarge the image
High Strength Ball Links and Stainless Steel Linkage Balls
Using new high strength ball links and stainless steel linkage balls on the whole unit, feature wear resistance, anti-oxidization.
Glass Fiber Body Frame and Stabilizer
STORM 450 - Glass Fiber 2.4GHz RTF Edition uses a combination of tough, lightweight Glass Fiber, aluminum and updated composite parts and is designed and equipped to be capable of the most extreme 3D maneuvers.
WFT07 7-Ch 2.4Ghz Transmitter with LCD Display
For a good Helicopter or Airplane Radio Set, it needs to be stable and fast on radio signal and able to setup for the Servo Reverse, Swashplate Direction and Curves... etc. We are glad to introduce you the latest WFLY 7-Channel 2.4Ghz Transmitter with LCD display (model number : WFT07). It has all the useful functions, like "Servo Reverse, Subtrims, Swashplate Travel and Direction, Pitch Curve, Throttle Curve, Dual Rate and EXP Curves, so you can use it on "ANY" brand of RC helicopter with these settings, it even has a Big LCD Display, that's one thing only the expensive model has. Don't forget, it has a 2.4Ghz radio module, which means it is fast and Anti-Jamming, long range too! For the price you can't get any better than this.
Anti-Interference & Higher Reliability
Operating at 2.4 GHz puts the radio control out of the frequency range of any 'noise' generated by the other electronic components on your helicopter - such as the brushless motor, Electronic speed controller, Gyro,
Servos and any metal to metal noise - eliminating interference and glitching
that can affect traditional frequency system.
Longer Transmission Distance (>2km) & Lower Power Consumption
DSSS (Coding technology) offers longer transmission
distance and minimizes power consumption. Also, no jamming with others in the field.
Faster Response Time
2.4 Ghz systems offers quicker, more responsive control, when compared to a standard frequency system.
No Frequency Control Required
A main characteristic of 2.4 Ghz equipment from a RC model club’s point of view is that no frequency control is needed. Eliminating the need to check everyone else's channel numbers, prior to flying. No more worries about turning up at a club with the wrong crystal in your Tx.
Glass Fiber Canopy
STORM 450 Glass Fiber 2.4GHz RTF Edition is equipped with this good looking high quality Glass Fiber Canopy.
High Power Storm 11.1V 2200mah 20C Li-Po Battery
11.1V 2200mah 20C Battery can provide you 6-8 minutes of quality flight time, more than enough for every flying style!
Came with a Li-Po Charger
Li-Po Charger ready to use in worldwide voltage (100V ~ 240V), we will provide you the correct country adapter, so it's really a trouble free package!
Specification
Precise English User Manual
Length:660mm
Height:230mm
Main Blade Length:325mm
Main Rotor Diameter:700mm
Tail Rotor Diameter:150mm
Weight (w/o main blade):450g
Flying Weight:Approx.730~760g
enlarge the image
STORM 450 Glass Fiber Edition includes:
- 100% pre-assembled helicopter
- WFLY WFT07H 2.4GHz LCD Digital Transmitter
- Transmitter manuel in a CD Rom
- Storm 11.1V 2200mAh 20C High Capacity Li-Po Battery
- Power Adapter
- Li-Po Battery Charger
- Blade Holder
- Free 1 Pair of 3K Carbon Fiber Main Blade
- Free 1 X Training Kit
| |
Storm 450
Glass Fiber |
Storm 450
Carbon Fiber
|
Storm 450 3G
Value Edition |
Storm 450 3GX
Platinum Edition |
| Motor |
3800KV |
3800KV |
3800KV |
3800KV |
| ESC |
30A / Linear BEC |
40A / Switching BEC |
40A / Switching BEC |
40A / Switching BEC |
| Gyro |
Storm ROCK-5
Headhold Gyro
|
Storm ROCK-5
Headhold Gyro
|
Helicox TG-1
3-Axis Gyro |
Align 3GX
3-Axis Gyro |
| Servo (CCPM) |
Storm MS-90G Servo
0.12s / 60 Degrees
|
Storm MS-110G Metal Gears Servo
0.09s / 60 Degrees |
EMAX ES08MD Digital Metal Gears Servo
0.09s / 60 Degrees |
Align DS410 Digital Servo
0.09s / 60 Degrees |
| Servo (Rudder) |
Storm MS-110G Metal Gears Servo
0.09s / 60 Degrees |
Align DS420 Digital Servo
0.06s / 60 Degrees |
Align DS420 Digital Servo
0.06s / 60 Degrees |
Align DS420 Digital Servo
0.06s / 60 Degrees |
| Radio System |
WFLY 2.4GHz LCD Display Transmitter |
WFLY 2.4GHz LCD Display Transmitter |
WFLY 2.4GHz LCD Display Transmitter |
WFLY 2.4GHz LCD Display Transmitter |
| Body Frame |
Glass Fiber |
Carbon Fiber |
Carbon Fiber |
Carbon Fiber |
| Rotor Head |
Best Quality Aluminum CNC |
Best Quality Aluminum CNC |
Best Quality Aluminum CNC |
Best Quality Aluminum CNC |
| Tail Gear Box |
Best Quality Aluminum CNC |
Best Quality Aluminum CNC |
Best Quality Aluminum CNC |
Best Quality Aluminum CNC |
| Blade |
Glass Fiber |
3K Carbon Fiber |
3K Carbon Fiber |
3K Carbon Fiber |
| Main Rotor Diameter |
730mm |
730mm
|
730mm |
730mm
|
| Stabilizer |
Glass Fiber |
Carbon Fiber |
Carbon Fiber |
Carbon Fiber |
| Canopy |
Glass Fiber |
Glass Fiber |
Glass Fiber |
Glass Fiber |
| Price |
USD $299 |
USD $349 |
USD $429 |
USD $559 |
| Performance |
 |
 |
 |
 |
| Value for Money |
|
|
|
|
 HeliPal.com Checks and Calibrates Every Single Helicopter Before Shipping!
 Do you know how important is it? Trust me, it is VERY IMPORTANT!
Many online sellers don't check and calibrate their products at all because it requires experienced rc pilots and it is very time consuming as well. Helipal.com team checks & calibrates every helicopters, Battery and Battery Charger to ensure everything is in good condition!
HeliPal.com Sends You Correct Power Adapter and Frequency!
There are too many types of power adapters in the world. For example, the power adapter for UK cannot be used in USA. We know the standard of your country and we will send you the correct one.
Suitable for :
Important Notice- Read Before Purchase
Please note that we have set the IDLE throttle curve to All Zero, this is because some beginners may accidentally activate this IDLE switch and could be very dangerous. So, for those advanced players, please set the IDLE Throttle Curve yourself when you get it.
Product Status : In-Stock
Useful Information :
Get it now for USD $569.00 USD $299.00 only!
| Available Options: |
| Alumnium Case: |
|
| Crash Pack: |
|
| Mode: |
|
| Radio Set: |
|
|
