The classic drone for all kinds of purpose
We like the Q380 frame because of the simplicty, it's made of 4x reinforced plastic arms and 2x PCB boards as the main frame, that's all.
Building the Q380 is an interesting task which makes it a good example for educational purpose, to show students how drones are made of, simply pick the right combination on motors, props and ESC, plus a flight controller and radio system, in about 3 hours you will have a working quadcopter.
380mm motor to motor
Cute little drone that is compatible with 9"~10" propellers. Best with 2212 to 2216 size, 800 to 960kv motor for 3S or 4S LiPo, you'll get about 15 to 20 minutes of flight time.
Frame Specifications :
PCB frames for soldering
The bottom frame is a PCB with soldering point, it's basically a big power distribution board, you simply solder the electronics (e.g. ESC, Flight controller, LEDs, UBEC module... etc.) to the soldering points to get main LiPo power, save a lot of messy wiring.
Flight Reference :
- Frame weight : 163g
- Motor to motor : 380mm
- Motor mounting pattern : 16mm x 19mm
- Recommend LiPo : 3S to 4S, 2200mah to 5500mah using 10" props.
This package includes :
- Battery : 3S 5500mah 35C XT60 connector
- Motor : 2212 800kv motor
- ESC : Storm 30A
- Propeller : Gemfan 1045
- Flight Controller : Betaflight
- All-up-weight : 882g
Useful Items :
- 1x Happymodel Q380 Quad Frame Set
Get it now for USD $27.90 only!