000499 PC Simulation Cable for ESKY, Storm Transmitter
[Esky-Parts-000499]

USD $13.90

For using this cable on STORM 2.4Ghz Transmitter
Remember, change the transmitter back to 6 Channel (HELI-120) after playing the Simulator!

You need to change the Transmitter to 4 Channel mode first, you can do this by using the "T6config" software that came along with the Transmitter :
1. Open T6config.exe
2. Connect your transmitter
3. Click "GetUser" to sync data to your computer
4. Click "Save" to save the current settings, this is important, you will need the 6 Channel setting returned after you finish playing the simulator
5. Choose "Type"
6. Select "HELI-90" to make the transmitter a 4 channel mode
7. You now have a 4 Channl Transmitter
By using FMS (the simulation software), you will be able to use this trnamsitter as "Controller" to play the simulation.

For using this cable on ESKY EK2-0406A Transmitter
Remember, change the DIP switches back to normal position before you turn on your real helicopter

1. Open the battery compartment on the transmitter
2. Find the two DIP switches(Red in color) inside the transmitter at the middle of the battery compartment
3. Switch DIP1 to ON and Switch DIP2 to OFF
4. Put in the batteries again, it should be able to use on FMS now

Software Introduction and Download : http://n.ethz.ch/student/mmoeller/fms/index_e.html

Designed for :

ESKY EK2-0404 or EK2-0406A Transmitter *

STORM 2.4Ghz Tranmitter *

Product Status : In-Stock

Get it now for USD $13.90 only!

Similar Products

000152 (EK2-0851) 7.2V & 11.1V Li-Polymer Balance Charger	000155 (EK2-0508) Digital Servo (8g)	000157 (EK1-0000A) Main Motor 9T 0.5m pinion	000187 (EK1-0200A) Rotor Head Set
000188 (EK1-0201) Ring-Link Push Rod	000190 (EK1-0203) Center Hub Set	000192 (EK1-0206) Paddle Control Frame (Outer)	000193 (EK1-0207) Swashplate Set
000196 (EK1-0213) Bearing Set	000199 (EK1-0217) Tail Rotor Drive Gear	000200 (EK1-0218) Bearing Set	000204 (EK1-0222) Tools
000207 (EK1-0001A) Tail Motor	000208 (EK1-0223) Tail Motor Heat Sink	000209 (EK1-0224) Heat Sink	000223 (EK1-0238) Main Shaft Drive Gear Set
000238 (EK1-0269) Paddle balance weight	000325 (EK1-0504) Main blade Sustain Set	000499 PC Simulation Cable for ESKY, Storm Transmitter	000500 (EK2-0901) Coach-Wire for ESKY Transmitter
000502 (EK2-0905A) ESky Flight Simulator Set	2-in-1 Battery Voltage Display + Warning Buzzer (LiPo)	5 X RB-4001 Fixed Pitch Main Blade (245mm)	Airy Ergonomics Control Stick for Transmitter (Mode 1)
Airy Ergonomics Control Stick for Transmitter (Mode 2)	AIRY Harden Blade II (AX-09)	Airy Neck Strap Adapter (For Walkera and Esky)	Airy Neck Strap for All Transmitter
EK2-0404 4Ch. Transmitter (72MHz) for Lama Series & Honey Bee	ET4i 2.4Ghz 4 Channel Transmitter	Power Adapter (12V 5A) for High Performance Battery Charger	Power Adapter (EU) for EK2-0851
RB-4001 Fixed Pitch Main Blade (245mm)	RB-4002 Fixed Pitch Tail Blade	Storm 11.1V 1500mAh 20C LiPo Battery Pack	000191 (EK1-0204) Flybar
000194 (EK1-0208) Servo Push-Rod Set	EK1-0210 Batter Hanger Set for Honey Bee	000197 (EK1-0215) Tail Rotor Housing	000210 (EK1-0225) Screw, Nuts, Washers
000211 (EK1-0226) Motor Wires	000221 (EK1-0237) Battery Hanger Set	000228 (EK1-0243) Tail Boom	000233 (EK1-0248) Main Frame Assembly
001097 (EK1-0268) Main Shaft Rotating Collar	000239 (EK1-0271) Servo Stand	000108 (EK2-0702) 4-in-1 Controller (35MHz)

000499 PC Simulation Cable for ESKY, Storm Transmitter[Esky-Parts-000499]

000499 PC Simulation Cable for ESKY, Storm Transmitter
[Esky-Parts-000499]