IOSD MARK II - Real Time Flight Data, amazing FPV Flight Experience with safety
OSD means "On Screen Display", the iOSD MK II is a black box put onboard the drone, act like a bridge connecting the camera and the FPV transmitter. It will overlap some important info on the TV Monitor, the screen looks just like a real Jet Fighter with horizontal lines, heights, speed, battery voltage and GPS signal strength... stuff like that, they make flying the drone much more fun! The iOSD MK II supports NAZA-M V2 and WooKong-M, can output to DJI AVL5.8Ghz FPV System or other FPV System, we went thru the installation, it's pretty easy, just you need to do some soldering for the Video Input and Output plugs.
Fly like a real plane
On screen display the real time info like Tilt Angle, Headings, Height, Speed, GPS Signal and Battery Voltage, you are a real pilot.
Highly integrated, beautiful and practical, compact size
The DJI iOSD MARK II adopts a highly integrated design which makes it very exquisite and practical. Many of the real-time aircraft flight information, such as the status and coordinates of the aircraft, are superposed on the video which gives you a more involved and safety flight experience.
Connection Diagram (Click to Enlarge)
Some DIY is needed, you may need to solder the correct plugs and wires for your system.
Support DJI Professional Autopilot System
The DJI iOSD MARK II should be used in conjunction with the DJI autopilot system, such as WooKong-M or Naza-M V2. This will undoubtedly give you a fantastic flight performance. Depending upon DJI’s accumulation of historic and reliable information integration technology, the iOSD MARK II can grab the most accurate first-hand flight data information in the shortest possible time.
Real-time Accurate Flight Data and Video Signal Superposition
The DJI iOSD MARK II can collect real-time video and flight data, which will help you to obtain the aircraft status information during flight. It can display power voltage, flight velocity, height, distance from the home point, horizontal attitude and GPS satellite number, etc.
Support Two Video Input Source - Switchable during flight
The DJI iOSD MARK II supports two video input sources: PAL or NTSC mode, which can be selected remotely by an R/C transmitter switch. By doing this the pilot can achieve double video alternation during flight and can also set one source for the aerial camera and the other one for FPV. This will ensure the nose direction of the aircraft is under control and a safety return during filming.
Change Video Channel during flight
The R/C TX switch can also change the wireless video transmitter channel remotely when user uses the wireless video transmitter designated by DJI. This design has brilliantly avoided the inconvenience of manual switch on the ground. Should there be any video signal interference during flight the pilot can switch channels immediately to finish the flight mission.
Free Upgrade Online
The DJI iOSD MARK II has a USB interface for future online upgrade in order to get a better user experience and free functional escalation.
Built-In BEC Module, support 3S-6S LiPo
DJI iOSD MARK II has a built-in BEC module which supports 3S – 6S LiPo battery. It provides the power supply for the camera and the main controller, which improves the power supply reliability.
User-Friendly Assistant Software
The iOSD MARK II now provides Assistant Software and supports online upgrade which makes it easy for you to acquire new functions. The current iOSD on the market can be upgraded to the new iOSD MARK II to have the flight log functions.
Flight Log Function
The DJI iOSD MARK II can record the flight log, which will help you to record the input and output information of every channel, GPS signal, power voltage, home distance and height, etc. (The current iOSD on the market will have flight log function after firmware upgrade.)
- Size : 52mm X 41mm X 11mm
- Weight : 56g
- Temperature : -20℃~60℃
- Video Input Model : Pal / NTSC
- Video Output Model : Pal / NTSC
- Voltage : 3S~6S (11V~26V)
- Current(Typical Value) : 60mA@25.2V /
- Rated Power : 1.25W
- Controller Supported : NAZA-M V2 / WooKong-M
- Build-in Function : iOSD Information Transmission /
Video Transmission, Two Video Signal Channels Input & Switch /
Channel Switch Supported for the Wireless Video Transmitter Module specified by DJI / .DJI Z15 Supported
This package includes :
1 X iOSD MK II
1 X Receiver Switch Cable
1 X FPV Cable 1 (The big colorful one)
1 X FPV Cable 2 (The big black one)
1 X Camera Connection Cable 1 (The black one with Ear-phone Jack)
1 X Camera Connection Cable 2 (The small colorful one with white plug)
1 X PMU Cable
Suitable for :
DJI NAZA-M V2 / WooKong-M
: In-stock now
Get it now for USD $255.00 only!