DJI's famous Hexacopter in Almost Ready to Fly Package - Flamewheel F550 Kit Combo 2 (NAZA V2 + Legs)
Quadricopter is fun, how about Hexacopter? This DJI's Flamewheel F550 ARF Kit has everything, Motors, ESC, Propellers, Landing Skids, even the Flight Controller in included, for this Combo 2, it has the NAZA-M V2 w/ GPS Module
, all you need is a Radio Set (Transmitter and Receiver), Battery and Charger, then you got yourself a very stable and interesting for fun flying or serious aerial filming project.
Spend sometime enjoying this hobby!
Put the drone together yourself, do some soldering work and KNOW this drone better.
Comes with latest DJI Propulsion System
Now with more powerful motor and ESC, better designed Self-Tightening 9450 propellers.
Great to take aerial footage with this Flamewheel F550 Platform
Hexacopter can take more loading than Qudrocopter, and they tend to fly more stable because it's a bit heavier. Six motors also provides more lift, that means you can carry more payload. Such as a Camera Gimbal and a GoPro Camera.
Ultra strength Material
Frame Arms adopt PA66+30GF ultra strength material design, providing better durability
Integrated PCB Wiring
The use of high strength compound PCB frame board, makes wiring of ESCs and battery safer and easier.
Huge Assembly Space
Optimized frame design, which provides abundant assembly space for autopilot systems.
Attractive Frame Arms
Provide different color frame arms: red, white, black, which makes your flight more colorful.
Take your drone to another level!
You will not believe your drone could be this stable.
With some RC experience, you should be able to install it
The system itself it easy, but setting up Transmitter is tricky, please prepare your transmitter manual for the job.
All in one design
DJI adheres to continuous innovation and improvement. With the new firmware, new attitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude and attitude and therefore can be used for autopilot/automatic control.
Different from V1, the V-SEN unit became this PMU
The Naza PMU V2 has enhanced BEC functionality and provides extendable CAN BUS ports, which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is also included for optional Bluetooth LED module to allow parameter adjustment via a mobile APP (future firmware upgrade required for this functionality)
The LED module
Put the LED module at the rear of the drone so you can see clearly for the status of the drone, like GPS signal reception, battery voltage.... etc.
Advanced Altitude Stabilizing Algorithm
The latest fourth generation attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability even without the GPS module. It is more flexible and stable, and gives the hobbyists a wonderful flight experience. New features have been included such as GPS course automatic compensation, GPS & Compass sensor calibration, new take-off mode and so on.
Switching Modes - GPS, Altitude or Manual
It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger.
GPS for perfect positioning, it will be hovering still at the same spot
The plug and play GPS module will greatly enhance the performance for Aerial Photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.
Watch out for the GPS Module Direction, it matters
Remember, red arrow Forward!!!
Course Lock and Home Lock
Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:
In course lock flying, the forward direction is the same as a recorded nose direction.
Lost transmitter signal? Don't worry, it will Auto Return Home
If your transmitter supports failsafe, then you can set failsafe through port-U. Naza controller has built-in auto level failsafe function, which means when the communication between MC and the transmitter is disconnected, the outputs of all command sticks from controller will go to center position. If the GPS module is used, you can also set RTH on failsafe. If your transmitter has only 4 channels, then MC will work in Atti. Mode by default without the failsafe function.
Two levels of battery voltage warning
In order to prevent your multi-rotor from crashing or other harmful consequences caused by low battery voltage, we have designed two levels of low voltage protection. You can choose not to use this, however we strongly recommend you to enable the protection. Both levels of protection have LED warning as default. The first level will blink the red light continuously; the second level will blink red light continuously and the multi-rotor will descend and land. In manual mode when low voltage protection is triggered the LED warning will be active only.
Four ways to "Arm" the drone
Sometimes we may accidentally moved the throttle stick and cause disaster, so you must do some gestures to start the motors, this is a safety feature.
Online firmware update
Easy firmware upgrade, extendible port for future use is available.
Support Futaba S.Bus
With Futaba S.Bus, you can use only one cable to replace a bunch of cable, connecting between a Futaba Receiver and the Naza-M Gyro, clean and tidy.
Naza-M supports Nine types of multi rotors
Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts.
Quad I, Quad X;
Hexa I, Hexa V, Hexa Y, Hexa IY;
Octo X, Octo I, Octo V; ( Naza-M V2 does not support the aircraft which has large vibration, so when you choose to use hexa-rotor or octo-rotor, please use the vibration dampening devices accordingly.
Stabilizing a camera gimbal
The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the helicopter after setting the parameters the first time.
Put the legs onto the drone (included)
So you can have a good ground clearence for the Camera Gimbal.
Flamewheel F550 ARF Kit Specifications :
- Frame weight : 478g
- Diagonal Wheelbase : 550mm
- Take off weight : 1200g ~ 2400g
- Recommended Propeller : 9" or 10"
- Recommended Battery : 3S or 4S
- Motor : 2312E 960KV X 6
- ESC : 430 Lite ESC X 6
This Flamewheel F550 Kit Combo 2 includes :
1 X Flamewheel F550 Frame Set (Assemble is required)
6 X 2312E 960KV Motor
6 X 430 Lite ESC
4 X 9450 CCW Self-Tightening Propeller
4 X 9450 CW Self-Tightening Propeller
1 X NAZA-M V2 Flight Controller w/ GPS Module
1 X DJI F450 / F550 Plastic Landing Skids
Suitable for :
Get it now for
USD $814.00 USD $429.00 only!