Don't want to see legs and props in the video? Get this kit!
Good news for the DJI F550 or Tarot F680 Pro users! Since GoPro camera's wide angle is REALLY wide (170 degrees), you always get the landing skids and props in the video. Get this kit, it is a rail system that allows you to move the camera forward to avoid the legs and props get into the video, problem solved!
It is a 60mm x dia.10mm rail system, included a Storm Gimbal Mount for 60mm rail which is designed for DJI H3-3D gimbal, and for those have the Tarot T-2D Gimbal, it's ok to use this rail system too, no tools are needed, just snap it on, able to install and remove the gimbal in 5 second. Because you have moved the camera forward, you need to off-set the weight by placing the battery at the rear end, so this pack includes an adjustable battery mount. The whole pack came with a Storm Gimbal Mount for 60mm rails, and Four Rail Mounts, two of them for securing the rails on the upper deck, two of them for mounting the battery.
No need to drill or modify anything, just simple 15 minutes job of some screws and zip tie the rail mounts onto the F550 Upper Deck. We strongly recommend this kit for aerial filming, you will get perfectly smooth video just like movies with no disturbing landing skids or propellers in the video. Whole kit is an extra 170 grams on the drone.
Why use the Camera Positioning Kit?
Don't want to see legs and props in the video? This is the answer
Move the camera forward, and off set the weight with battery at the rear.
Storm Gimbal Mount for 60mm Rail
The mount is designed for DJI H3-3D Gimbal
, the screw holes fit perfectly, and there is a hole in the middle to fit with the Pan Axis Motor. The mount can also be used with other brand of gimbals too, like the Airy and Feiyu gimbal, as long as the gimbal has a Flat-top, you can fix that onto this mount.
Gimbal is Easy to mount, Easy to remove!
Just slip it on, install and remove it in 5 seconds. Also very easy to adjust weight balance.
How to install?
According to the photos, please remove one of the screws for each arms
, then you'll have the carbon plate touching the upper deck completely instead of touching the screws only. Then the rest of the kit with zip ties.
How to mount the battery?
Use two of the rail mount, and two battery straps. Remember to move the battery forward or backward to a good weight balance point.
Remember to re-balance the drone!
It's VERY IMPORTANT
to off-set the gimbal and camera weight by repositioning the battery on the rail, otherwise you will overload the motor and end up crashing.
This package includes :
2 X 660mm x dia.10mm carbon fiber tube
4 X Rail Mount Sets (2.0mm Hex Screwdriver needed)
1 X Storm Gimbal Mount for 60mm rail (good for H3-3D and other gimbal) (2.5mm Hex Screwdriver needed)
2 X Battery Strap
20 X 100mm zip ties
Suitable for :
DJI F550 with H3-3D gimbal / T-2D Gimbal / Other gimbals
Tarot FY680-Pro / FY690S with H3-3D gimbal / T-2D Gimbal / Other gimbals
Get it now for
USD $69.90 USD $54.90 only!