A Great FPV System for Aerial Filming
Among many FPV Systems, Helipal chose the Boscam as our work equipment for reason. Boscam is a company based in China specialized in mini size industrial cameras, they are pretty famous in this field. This FPV system has a 5.8Ghz Transmitter and Receiver, made with high grade IC Chips and well made integrated circuit, it has the best reliability and image quality we've ever seen, the good material and soldering helps to generate "clean" radio waves to broadcast long range and remain good image quality, yet it will not emit "rubbish" wave that will jam the Radio Control or GPS Signal. The TS352 Transmitter has 500mw Output, in open field with nothing blocking the way and with original antenna, 500-800m (depends on environment) is no problem, came with Aluminum heat sink and cooling fan onboard, that saves you the trouble for those DIY work, you just buy this system, plug and play.
We connected a GoPro HERO 3 to the transmitter, everything works like a charm. One thing to mention is that you need to solder the Yellow and Black wire to the GoPro USB cable (we have this GoPro 2 / GoPro3 video cable for sell)
, and make sure you have JST plug batteries to power up the system, otherwise you need to solder your own plug.
Difference between TS352 System and TS832 Sysytem
TS832 + RC832 is a 32 channel FPV system with 600mw output, for some people living in dense area with a lot a other frequency in the air, so they want more channel so they can pick the best one to avoid jamming with others, selecting channel is easy, just press a button to swap channel, and 600mw output is a bit higher than TS352 + RC305 FPV system, TS352 + RC305 just have 8 channels with DIP switch, and it only has 500mw output.
Reliable FPV equipment
We are also using this Transmitter and Receiver system, works perfectly!
Testing TS352 Video Transmitter on spectrum machine
Testing another brand of Video Transmitter on spectrum machine
Standard 5.8Ghz Receiver
Came with a short antenna, works pretty good.
We put it on our drone.
Came with useful connecting cables
You just need to solder the Camera cable with the transmitter, both Transmitter and Receiver works on 12V (3S Li-Po), JST plug.
Making it GoPro standard
GoPro just need the Yellow and Black wire, Yellow is Video In, Black is Ground.
Connection diagram for the Transmitter
We are using GoPro HERO 3 as the camera.
Connection diagram for the Receiver
We are using GoPro HERO 3 as the camera. (Click to enlarge)
Default 5.8Ghz Channel setup
TS352 5.8Ghz FPV Transmitter Specifications :
- Antenna connector : RP-SMA Female
- 5.8Ghz Video and Audio
- Power Output : 500mw
- Channel : 8 Channels selectable thru DIP Switch
- Video output : 1Vp-p 75Ω
- Audio output : 1Vp-p 600Ω
- Power supply : DC 7.4V~14.8V (2S~4S Li-Po)
- Working current : 550mA
- Video : PAL / NTSC
- Dimension : 5.2cm x 6.8cm x 1.3cm
- Weight: 55g (with antenna)
RC305 5.8Ghz FPV Receiver Specifications :
- Antenna connector : RP-SMA Female
- Receiving frequency : 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945mhz
- Receiving sensitivity : -90dBm
- Frequency control : built-in frequency and phase lock loop
- Double lines AV output : analog AV signal output
- Power supply voltage : DC 7.4V~13V (7.4V 2S to 11.1V 3S Li-Po)
- Working current : 150mA
- Dimension : 61 x 52 x 13mm (aluminum alloy extrusion profiles)
- Weight: 52g (with antenna)
This package includes :
TS352 FPV 5.8Ghz Transmitter w/ Antenna
RC5808 FPV 5.8Ghz Receiver w/ Antenna
Transmitter Power Supply Cable (JST Plug)
Transmitter Camera Connection Cable (Yellow and Black for GoPro)
Receiver Power Supply Cable (JST Plug)
Receiver Video Output Cable (RCA Plugs)
Get it now for
USD $99.90 USD $74.90 only!